IGBT Driver for up 3300V Modules, Type HPM - Fiber Series
The AgileSwitch HPFM-HPM Fiber driver provides monitoring and fault reporting information to enable better control and analysis of an IGBT-based power system. The HPFM provides up to 30 Amps of peak current at an operating frequency up to 15 kHz. The driver includes an isolated DC/DC converter and provides a single fault that is reported via the dual channel fiber I/O. All AgileSwitch drivers use automotive temperature grade components and allow for modifying settings of gate resistors and active clamping.
Grundlegende Informationen:
Herstellerkennzeichnung | HPFM-HPM |
Gehäusetyp: | !_mod_! |
Konfiguration: | !_low side_! |
Spezifikationen: | !_1-channel_! |
RoHS | Ja |
REACH | !_ne_! |
NOVINKA | A |
Elektrische Parameter:
Udc (URRM, UCEO, Umax) | 3300 [V] |
Idc max (Tc/Ta=25÷160°C) | 30 [A] |
Idc max (Tc/Ta=25°C) | 30 [A] |
Idc max (Tc/Ta=70÷79°C) | 17 [A] |
Udc-sup.min (Min.Supply DC Voltage) | 14.3 [V] |
Udc-sup.max (Max.Supply DC Voltage) | 17.5 [V] |
Uisol (@25°C/1min/50Hz) | 6000 [V] |
UDC-OUT (off/min) | -10 [V] |
UDC-OUT (on/max) | 16 [V] |
IOUT puls (Log.1=ON) (TA=25°C) | 30 [A] |
IOUT puls (Log.0=OFF) (TA=25°C) | -30 [A] |
du/dt (critical rate of rise of on-state voltage) | 50000 [V/µs] |
Pd-bez chladiče (Ta=25÷75°C) | 7 [W] |
Input Logic Level (Ugs level) | 15V |
tf (turn-off=fall time) | 500 [ns] |
Ft (transition/operation frequency) (@Inom.) | 0.015 [MHz] |
Cin/CL Load Capacitance | 1000 pF |
Thermische und mechanische Parameter:
Tmin (minimale Arbeitstemperatur) | -40 [°C] |
Tmax (maximale Arbeitstemperatur) | 85 [°C] |
Abmessungen:
Abmessungen der Anschlüsse | 0.00 [mm] |
Verpackung und Gewicht:
Einheit: | Stück |
Gewicht: | 100 [g] |
VPE-Karton: | 10 |